Caring for the Cooling System in Your Blazer

The Chevy Blazer is typically a fairly reliable automobile. However, that doesn’t mean that you won’t have to do some tampering with it from time to time. In the event that you’re having trouble with your cooling system, there are some problems you can fix on your own and others that will probably require professional assistance. Here’s a list of tips to help you properly care for your Blazer’s cooling system.

Know the Signs of a Problem within Your Cooling System

It’s important to be able to spot the signs of a malfunction or deficiency in your cooling system. If you are experiencing overheating, chances are there is a problem with your system. Check the temperature gauge for your engine, located on the dashboard. The indicator should remain in the safe areas of the scale. If you are getting hot readings, you’ll want to make sure the cooling system is functioning properly. You may also notice the smell of antifreeze in conjunction with cooling problems.

Know the Possible Causes of Problems within Your Cooling System

There are typically three main factors that can cause problems in the cooling system of Chevy Blazers. The first is when the vehicle lacks proper coolant levels. Another reason might be that there isn’t adequate circulation in the system. This can be caused by a problem with the thermostat, a fault in the water pump, or a clog in the radiator. The last typical cause has to do with broken gasket heads, which can cause the coolant to be used up too quickly.

Ensure Your Blazer Has Enough Coolant

Your Blazer should always have sufficient coolant. Check the levels from time to time and refill as necessary. If it seems as if you are going through coolant too fast, it’s likely there is a problem with a gasket head in the system. You should also be sure to use the right specification coolant for your Blazer. This will vary, depending on the year of your car.

Let Your Blazer Settle Before Changing Its Coolant

If you changing the coolant in your Blazer, make sure that you allow it to sit before attempting to do the necessary work. You should ideally allow the car to sit for several hours. This will ensure that its interior systems are fully depressurized. It will also allow for any heat in the interior of your vehicle to dissipate and lessen your risk of getting burned.

Know when to Bring Your Blazer to a Professional

Unless you’re performing basic maintenance or have a firm understanding of your Chevy, you may be better off leaving cooling system work to a professional. There are causes for cooling system problems that are tough for the inexperienced repairman to remedy. If you only need to change the coolant, chances are you can manage alone. However, make sure that you don’t cause any additional complications for your Chevy when attempting to follow directions that are hard to understand or may not be accurate.

Having a basic understanding of how your car works can make life a lot easier. If the cooling system in your Chevy starts acting up, try and identify the cause of the problem. Some issues may be fixable, depending on the circumstance and the degree of familiarity with your vehicle. Either way, it’s important that issues with the cooling system are repaired quickly, as it’s vital to the safety and functionality of your car.